Timber Coatings

Timber Coatings

Mirotone has an extensive range of coatings for timber and wood related substrates such as mdf. From lacquers to high performance polyurethane and UV Cured coatings, Mirotone has the right coating system to suit your requirements.

For Technical support Contact Us.

Per Page

12 Results

  • SPRAYGLOW

    Code: 1012004
    Lightly perfumed, silicone-free furniture polish which has been specifically formulated to clean and protect both lacquered and unlacquered wooden articles.

  • MIROFIL 1702 Wood Filler

    Code: 1702
    Easy to use, single pack wood filler used to produce a closed pore finish.

  • MIROSTRIP 1019 Paint Stripper

    Code: 1019
    General purpose paint stripper suitable for stripping most types of paint from timber and metal surfaces.

  • MIROCAT PC 3244 Clear Sealer

    Code: 3244
    High build, single pack, clear pre-catalysed sanding sealer that provides an excellent base for a range of Mirotone topcoats.

  • MIROCAT PC 3241 Clear Sealer

    Code: 3241
    An economical, fast drying, easy to sand clear sealer. Can be applied over dark timbers or stains enhancing the natural colours without clouding the finished appearance.

  • MIROLOK 3508 Glass Clean/Prime

    Code: 3508
    Easy to use, fast drying primer used to both clean glass and provide excellent adhesion to glass for MIROTHANE PU metallic, pearlescent or solid coloured topcoats.

  • MIROBILD AC 3622 Clear Sealer

    Code: 3622
    High build, fast drying, easy sanding, clear acid catalysed sealer. Specifically formulated to provide sound adhesion to DAP and vinyl coated board (commonly used in the casket industry).

  • MIROTHANE PU 5500 Isolator

    Code: 5500
    Versatile clear isolator that minimises the risk of resin exudation and tannin bleed on timber and minimises the risk of edge cracking on MDF.

  • MIROTHANE PU 5535 Clear Sealer

    Code: 5535
    A two pack, clear, polyurethane sanding sealer typically used under MIROPOL PE 5007 High Gloss Clear Top Coat on timber, veneer or foil covered MDF board to provide a high-gloss, wet look finish.

  • MIROTHANE PU 5545 Clear Sealer

    Code: 5545
    Premium, two pack, clear, polyurethane sealer that provides an excellent sanding base for clear polyurethane topcoats.

  • MIROTEC WB 8022 Clear Sealer

    Code: 8022
    Clear, single pack, water based sealer that is easy to apply, low yellowing and easy to sand.

  • STRIPCOAT

    Code: 3520
    Temporary coating designed to provide a removable protective film to the inside of galvanised steel spray booths. This film can be easily removed to reduce unwanted overspray build up reducing the risk of dust contamination and the risk of fire.
To top