Timber Coatings

Timber Coatings

Mirotone has an extensive range of coatings for timber and wood related substrates such as mdf. From lacquers to high performance polyurethane and UV Cured coatings, Mirotone has the right coating system to suit your requirements.

For Technical support Contact Us.

Per Page

20 Results

  • MIROLAC NC 3150 Pigmented Topcoat

    Code: 3150
    User friendly, single pack, pigmented topcoat ideal for furniture and fixtures. It´s easy to apply, fast drying and results in a velvet smooth high build finish.

  • MIROCAT PC 3210 Clear Topcoat

    Code: 3210
    User friendly, single pack, pre-catalysed clear lacquer for fixture and furniture finishing.

  • MIROCAT PC 3220 Clear Topcoat

    Code: 3220
    Premium quality, high build, single pack, pre-catalysed clear lacquer.

  • MIROCAT PC 3244 Clear Sealer

    Code: 3244
    High build, single pack, clear pre-catalysed sanding sealer that provides an excellent base for a range of Mirotone topcoats.

  • MIROCAT PC 3241 Clear Sealer

    Code: 3241
    An economical, fast drying, easy to sand clear sealer. Can be applied over dark timbers or stains enhancing the natural colours without clouding the finished appearance.

  • MIROBILD AC 3606 Clear Topcoat

    Code: 3606
    Low odour, low formaldehyde, isocyanate free clear acid catalysed topcoat with a long pot life, suitable for interior wood.

  • MIROBILD AC 3622 Clear Sealer

    Code: 3622
    High build, fast drying, easy sanding, clear acid catalysed sealer. Specifically formulated to provide sound adhesion to DAP and vinyl coated board (commonly used in the casket industry).

  • MIROBILD AC 3750 Pigmented Topcoat

    Code: 3750
    A high solids, pigmented, acid catalysed topcoat.

  • MIROTHANE PU 5500 Isolator

    Code: 5500
    Versatile clear isolator that minimises the risk of resin exudation and tannin bleed on timber and minimises the risk of edge cracking on MDF.

  • MIROTHANE PU 5535 Clear Sealer

    Code: 5535
    A two pack, clear, polyurethane sanding sealer typically used under MIROPOL PE 5007 High Gloss Clear Top Coat on timber, veneer or foil covered MDF board to provide a high-gloss, wet look finish.

  • MIROTHANE PU 5545 Clear Sealer

    Code: 5545
    Premium, two pack, clear, polyurethane sealer that provides an excellent sanding base for clear polyurethane topcoats.

  • MIROTHANE PU 5555 Clear Topcoat

    Code: 5555
    Premium, two pack, clear polyurethane. High clarity results in striking grain definition and enhances the natural beauty of stained timber.
To top