MIROTEC WB 8126 Water Based Undercoat

A pigmented, single pack, water based undercoat that may be applied by spray, it is especially suited for application on automatic lines.

Features

Single pack, no pot life issues to manage and less waste of product.
Excellent sanding, powders easily.
Low VOC (solvent content), non-flammable, low odour safer for workers and the environment.
Complies with the Green Bui;ding Council Australia: Green Star - Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings.
Mould resistant, contains fungal biocides for in-can stability and protection against discolouration from fungal / mould stains once applied.

Build: Good

Sandability: Excellent

Vertical Hold-Up: Very Good

Solvent Reistance: Good

Water Resistance: Excellent

Levelling & Flow: Excellent

Sink Back: Minimal Colour: White

Coverage: 10m2 per litre at 100 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated.

Dry Time: Dust Free: 8-12 minutes Touch Dry: 10-15 minutes Sanding: 30-40 minutes Block Stacking: 24 hours